Simpliroute
SimpliRoute
SimpliRoute is a data retransmission protocol that delivers vehicle tracking data for users to send information from their system to SimpliRoute.
Protocol Category: Enterprise compliance
Table of contents
What is SimpliRoute?
SimpliRoute is a data retransmission protocol that delivers vehicle location data and links it to the SimpliRoute order system. This allows users the ability to track orders that are managed within this software and that are synchronized with the vehicle positions obtained.
This data retransmission protocol is ideal for users looking to comply with Simpliroute data forwarding to track vehicle positioning.
SimpliRoute general technical information
The SimpliRoute protocol utilizes the POST method to send JSON data over HTTP to the SimpliRoute servers for further data processing.
Data sent to SimpliRoute:
Vehicle VIN
License Plate
Latitude
Longitude
Date/Time
Speed
Ignition
GPS Provider - tax number specified in user information
SimpliRoute Configuration
Setting up
Required Parameters
Vehicle built with associated license plate and VIN according to the standards here.
To set up data forwarding for the SimpliRoute protocol, open the device settings from the main menu by pressing the “Gear” icon on the bottom left of the screen.
Then, click the “Data forwarding” widget.
Click “Protocols”.
This will open a popup where you will input the required parameters by pressing the + button.
For the SimpliRoute protocol, input the following information:
| Parameter | Explanation | | --- | --- | | Name | * Address: http://unigis2.unisolutions.com.ar/HUB/UNIGIS/MAPI/SOAP/GPS/Service.asmx<br>* Port: 80 | | Protocol | Select the Simple Route protocol from the dropdown | | Destination server address and port | * Address: https://k8k5azm77j.execute-api.sa-east-1.amazonaws.com/prod/gps<br>* Port: 443 |
A Retranslation management screen should look similar to the following, with SimpliRoute login and password. Make sure the "Enabled" button is checked and click the "Save" button to complete the process.
Next, the retranslator will need to be linked to the device on the Unigis side. To do so, select the “Link”
button in the data forwarding widget. Select the retranslator to be connected, and click “Link” below.
External ID is not needed for the SimpliRoute protocol.
Select “Save” once completed.
Managing
To edit or stop data being forwarded, please refer to the following steps:
To stop the data forwarding, click the “Trash” button.
Next, acknowledge the change on the popup.
To change retranslator settings such as name, login information, or enabled, click “Protocols.”
This will open the retranslator management window. Select the row to edit and either click the pencil in the top left, or double-click the row in question to allow editing. Save any changes.
Troubleshooting
If data does not display on the 3rd party SimpliRoute system, please verify:
URL was entered correctly
Retranslator is enabled
Tracker on Navixy is associated with a vehicle on the platform with a valid license plate and VIN