Predefined event identifiers
Navixy Generic Protocol includes pre-defined event identifiers (event_id
) for the most common cases and alerts. Use these standard IDs whenever possible, reserving custom IDs (starting from 10,000) for unmatched events.
Power
The range for power alerts is 1 – 100.
Event id | Description |
---|---|
1 | Low battery |
2 | Power lost or external power cut |
3 | Power On button pressed |
4 | Power recovered or external power connected |
5 | OBD Unplug from the car’s connector |
6 | OBD Plug in |
7 | Device’s backup battery low |
8 | Device wakes up from a sleep mode |
9 | Sleep mode start |
10 | Timer wakeup |
11 | Motion wakeup |
12 | External power wakeup |
13 | Power Off button pressed |
14 | Device power Off |
15 | Device power On |
Security
The range for security alerts is 101 – 200.
Identifier | Description |
---|---|
101 | Unauthorized movement event determined by the device (tow detection) |
102 | Unauthorized movement end |
103 | Device detached from the tracked object |
104 | Car alarm |
105 | Device’s case closed |
106 | Device’s case opened |
107 | Unplug from the tracked object |
108 | Attach device to the tracked object |
109 | Door alarm |
110 | Device’s lock closed |
111 | Device’s lock opened |
112 | Vibration end |
113 | Vibration start |
114 | Strap bolt Inserted |
115 | Strap bolt cut |
116 | GPS jamming |
117 | GSM signal jamming alarm |
118 | Bracelet open |
119 | Bracelet closed |
120 | G sensor alert |
Safety
The range for safety alerts is 201 – 300.
Identifier | Description |
---|---|
201 | Emergency contact number called |
202 | SOS button pressed event |
203 | Cruise control switched on |
204 | Cruise control switched off |
205 | DMS. Driver not identified |
206 | DMS. Driver identified |
207 | ADAS. Frequent lane change |
208 | DMS. Device can't detect human face |
209 | Seat belt unbuckled |
210 | DMS. Driver is drinking |
211 | DMS. Driver eyes are closed |
212 | DMS. Report new driver detection |
213 | DMS. Driver enters cabin |
214 | DMS. Start driver absence |
215 | DMS. Driver stopped smoking (Driver distraction) |
216 | DMS. Driver started smoking (Driver distraction) |
217 | DMS. Driver finished using the phone (Driver distraction) |
218 | DMS. Driver started using the phone (Driver distraction) |
219 | DMS. Yawning detected (Fatigue driving) |
220 | DMS. Driver stopped distraction (Driver distraction) |
221 | DMS. Driver started distraction (Driver distraction) |
222 | DMS. Driver stop drowsiness (Fatigue driving) |
223 | DMS. Driver start drowsiness (Fatigue driving) |
224 | Over speeding |
225 | Unexpected movement start |
226 | Unexpected movement end |
227 | ADAS. Peds in danger zone |
228 | ADAS. Traffic sign recognition |
229 | ADAS. Peds collision warning |
230 | Fatigue driving |
231 | ADAS. Headway warning |
232 | ADAS. Right lane departure |
233 | ADAS. Left lane departure |
234 | ADAS. Lane departure |
235 | ADAS. Forward collision warning |
236 | Harsh driving quick lane change |
237 | Harsh driving acceleration and turn |
238 | Harsh driving braking and turn |
239 | Harsh driving turn |
240 | Harsh driving acceleration |
241 | Harsh driving braking |
242 | Crash alarm |
243 | Harsh driving |
244 | Call button pressed |
Vehicle efficiency
The range for vehicle efficiency alerts is 301 – 400.
Identifier | Description |
---|---|
301 | Idle end |
302 | Idle start |
303 | Check engine light |
Track information
The range for track information alerts is 401 – 500.
Identifier | Description |
---|---|
401 | Track. No specific event, just a track point |
402 | GSM LBS point report |
403 | Track point by time |
404 | Track point by distance |
405 | Track point by angle |
406 | Track movement start |
407 | Track movement end |
408 | Non-track message |
409 | Tracker entered auto geofence |
410 | Tracker exited auto geofence |
Inputs
The range for inputs is 501 – 550.
Identifier | Description |
---|---|
501 | Input 1 state changed |
502 | Input 2 state changed |
503 | Input 3 state changed |
504 | Input 4 state changed |
505 | Input 5 state changed |
506 | Input 6 state changed |
507 | Input 7 state changed |
508 | Input 8 state changed |
Outputs
The range for outputs is 551 – 600.
Identifier | Description |
---|---|
551 | Output 1 state changed |
552 | Output 2 state changed |
553 | Output 3 state changed |
554 | Output 4 state changed |
555 | Output 5 state changed |
556 | Output 6 state changed |
557 | Output 7 state changed |
558 | Output 8 state changed |
Peripherals and other
The range for inputs and outputs alerts is 601 – 700.
Identifier | Description |
---|
Identifier | Description |
---|---|
601 | Antenna disconnected |
602 | Accessory disconnected |
603 | Accessory connected |
604 | Ignition Off |
605 | Ignition On |
606 | Light sensor determined dark |
607 | Light Sensor determined bright |
608 | GPS signal recovered |
609 | GPS signal lost |